|
New Page 1
Simultaneous operation in different modes is now possible
with this recent development of the highly successful 9100 multi-function
counter. Additional enhancements include 3-line display, more keys, network
capability, enhanced programming, EEPROM memory avoiding the need for a battery,
and on-screen programming prompts in four languages.
• Simultaneously maintains any 3 of the following:
Count preset, count pre warn, batch preset, overspeed, underspeed condition and
displays count, total and speed.
• Counts in any of 7 modes: A-B, A+B, A/B, count and direction and
quadrature x1, x2 & x4.
• EEPROM retains program and data for 40 years with no power.
• 3 line Supertwist LCD display viewable from any angle.
• Easily programmed in English, German, French or Spanish using simple
menu structure and 10-key keypad.
• Counting continues while rate measurement is in progress.
• Accurate enough for position sensing and robotic control.
• CAN bus/Device Net interface (as an option).
• Displayed values, choice of engineering units and 12 characters of
user programmable text can be printed directly from the IBM/Epson compatible
serial printer port.
• Can be powered from 85-265VAC for world wide use.
• Multiplying and dividing prescalers enable display directly in the
required (engineering) units.
• Manual, remote and automatic resets available.
• Remote inhibit and remote keyboard disable.
• Fast electronic or slow contact closure inputs, all with optical
isolation. Contact closure inputs are debounced.
• Auxiliary 12VDC 100mA power output to power sensor.
• Environmental protection to IP65.
• CE approved. UL and cUL approval pending.
The 9100 carries out rate measurement, batch counting and
totalising simultaneously. Rate mode is signified by an R appearing at the top
left hand corner of the display and counting carries on in the background. The
first line of the display shows pulses per minute (PPM) unless a prescaler is in
use.
Specification
Power Supply
85 - 265VAC.
Auxiliary Output
12VDC ±10% 100mA for powering sensors.
Display
3 line high contrast supertwist backlit:
LINE 1: 8 numeric LCD
LINE 2: 12 alphanumeric
LINE 3: 12 alphanumeric
Keyboard
Sealed elastometric keyboard with 10 keys.
Connections
1 x 9 way and 1 x 10 way plug in terminal strips with wire clamps. Each way
capable of accepting up to 2 OFF 2.5mm2 (0.1in2) conductors.
Prescaler
0.0025 - 9.99999 . Multiplying 0.00250 - 9.99999. Dividing 1- 9999.
Rate Input
Input A only. 8 - 30VDC. Maximum 600k PPM (10kHz), minimum 4.7 PPM (0.078Hz ie
one pulse every 12.8s)
Control Inputs
External reset, count inhibit, keyboard disable. Maximum 30Hz contact closure or
solid state input. 8 - 30VDC opto-isolated.
Manual Reset
Can be disabled on installation or remotely reset.
Remote Reset
Contact closure or pulse (maximum 30Hz)
Automatic Reset
Program to reset to zero on reaching preset 3 or vice versa.
Control Outputs
3 SPST relays. Contacts 5A 260VAC, 220VDC 1300VA/150W. Programmable for pulsed,
latched or disabled.
Front Panel Sealing
IP65 when properly mounted using gasket supplied.
Operating Temp.
-10°C to +60°C.
Storage Temp.
-20°C to +70°C.
Relative Humidity
85% at 25°C non-condensing.
|
