|
New Page 1
The LCD panel of this counter has two rows of 6 digits each.
The upper characters are 7mm high and indicate the count value. The lower
characters are 4mm high and indicate the preset point. It will count up to, or
down from, the preset value and operate the output relay when the count reaches
up to the preset or down to zero.
• Easy to operate.
• Locatable decimal point (up to 3 places).
• Front panel programming via 6 keys (one for each digit) and a manual
reset key.
• Reset is user configurable to reset to zero (adding) or reset to preset
(subtracting).
• Manual and electrical reset.
• Front panel keys can be remotely enabled and disabled.
• Front panel sealing to IP65 using the sealing gasket supplied.
• Opto-isolated count and reset inputs.
• Operates for up to 10 years @ 20°C or 106 relay operations, with
internal user replaceable lithium batteries.
• Relay contacts are rated at 8A programmable to NO or NC.
• Range of bezels available to fit existing panel cutouts of popular
sizes of electro-mechanical counters.
• CE approved.
Connection to the unit is via plug-in finger proof screw
terminals on the rear panel each accommodating up to 2 x 2.5mm2 conductors. A
panel mounting clip and bezel adaptor, for existing 50 x 50mm panel cutouts, is
provided although using the bezel adaptor will not achieve the IP65 protection.
Specification
Display
2 rows of 6 digits, black on silver LCD. Upper row 7mm high characters indicate
count, lower row 4mm high characters indicate the preset value. Also Relay
Active and Lo-bat annunciators. Leading zero blanking.
Preset Point
Single user selectable preset point.
Opto-isolated Count and Reset Inputs
12 - 250VAC or DC.
Maximum Input Frequency
25Hz.
Reaction Time of Inputs
Reset 50ms, keyboard disable 15ms.
Output Relay
Programmable as NO or NC. SPST rated at 8A 230VAC, 5A at 30VDC. Reaction time
<20ms.
Operating Temp.
-10°C to +60°C.
Storage Temp.
-20°C to +70°C.
Environmental Protection
IP65 when properly installed using the sealing gasket supplied.
WARNING: THIS PRODUCT CONTAINS A LITHIUM
BATTERY AND MUST NOT BE CUT OPEN, DISPOSED OF IN A FIRE OR EXPOSED TO
TEMPERATURES OUTSIDE THE RANGE -20°C TO +60°C.
|
