|
Flexible count controller which combines high speed counting with plc
logic functions and analogue input and output for a wide range
4T764 Series encoders have a full through hollow shaft (which
may be fixed at either end). The bore size is 10mm. The encoder body is fixed by
means of two flexible mountings which compensate for minor shaft misalignment.
The Output circuit has a push/pull output as standard, signals A, B, Z and Z are
output.
• Quadrature output.
• Index output channels z and z-.
• Fixable by flexible mountings.
• 10 mm hollow through shaft, can be fixed at either end with optional
clamp ring.
• Ideal replacement for mechanical counters when used in conjunction
with a suitable electronic counter.
Specification
Input voltage range
4.75 to 24V (+10%).
Regulation, for 5V operation
5%, with 2% maximum ripple.
Current consumption
75 to 125 mA.
Output circuits
A, B, Z, Z- @ 20mA each.
Frequency response
50 KHz.
Accuracy
0.0117° or 1 Arc / Min.
Max shaft speed
6,000 rpm continuous.
Shaft sizes and types
10mm through shaft.
Housing
Aluminium with protective finish.
Mounting
Shaft set screws or split clamp and flexible mounting springs.
Operating temp.
-10°C to +70°C.
Humidity
95%RH.
Protection
IP54
|
