 |
 |
 |
|
|
Flexible count controller which combines high speed counting with plc
logic functions and analogue input and output for a wide range
This low cost and very rugged size 25 encoder has been
designed to suit a wide variety of industrial applications. The unit has a 10mm
diameter shaft. A square mounting flange is fitted as standard. A 2M cable is
fitted, this enters the unit via a gland situated on the side of the unit. The
Output circuit has a push/pull output as standard, signals A, B, Z and Z- are
output.
• Quadrature output.
• Index output channels z and z-.
• Square mounting flange enables easy mounting.
• Robust heavy duty 10 mm shaft.
• Ideal replacement for mechanical counters when used in conjunction
with a suitable electronic counter.
Specification
Input voltage range
5 to 24V (+ 10%).
Regulation, for 5V operation
5%, with 2% maximum ripple.
Current consumption
50 to 100 mA typical.
Output circuits
A, B, Z, Z- @ 20mA each.
Frequency response
20 KHz.
Accuracy
0.017° or 1 Arc/Min.
Max shaft speed
6,000 rpm continuous.
Shaft sizes and types
10mm diameter.
Housing
Aluminium with protective finish.
Mounting
Square flange.
Operating temp.
-10°C to +70°C.
Humidity
95% RH.
Protection
IP54.
|
|
|
|
|
|
|
|
|
