|
Flexible count controller which combines high speed counting with plc
logic functions and analogue input and output for a wide range
The model shown is a basic unit; variations are available to
special order. All models are robustly constructed for continuous operation at
high speeds with the main shaft running in double oil impregnated bearings to
ensure accurate, long term, trouble free service.
• Heavy Duty
• Top viewing (front viewing models are available).
• 6 digit 6.4mm (0.25in) readout.
• 10.00mm (0.394in) diameter drive shafts.
• Up to 3000 counts per minute with 1:1 gear ratio.
• 1:1, 1:10, 2:1, 3:1, 4:1 gearings as standard.
• Customised gearing available on all models (but some gearings may have
fewer digits on the readout).
• Reset to zero and non-reset models available.
• Reset by lever, or cylindrical lock and key.
This counter can be driven from either or both sides. All
resettable models can have the reset
lever on the left or the right. A non-reset model is also available.
Specification
Display
White on black, decimals black on white.
Top viewing, 6.4mm (0.25in) high figures.
Mountlng Base Material
Aluminium alloy.
Cover Material
Black ABS plastic.
Drive Shaft Diameter
10.00mm (0.394in).
Gearing
1:1, 1:10, 2:1, 3:1, 4:1 as standard. Others on application.
Bearings
Bronze, oil impregnated for life.
Operating Torque
180g.cm (2.5oz.in) at 1:1 gearing.
Maximum Shaft Speed
3000RPM.
Maximum Count Speed
3000CPM.
Operating Temp.
-10°C to +60°C.
Storage Temp.
-20°C to +70°C.
Environmental Protection
IP40.
Nett Weight
550g.
Packed Weight
600g
Packed Dimensions
19 x 13 x 11cm
|
